GILES EOF Series Operation & Service Manual Download Page 75

Page: 75 / 128

Fryer Operation

EOF SERIES FRYERS

1. Initially, ensure that

Heat Switch

①

is in the

[OFF]

position.

2. Place

Power Switch

②

in the

[ON]

position.

The green

Power Light

③

will illuminate; Computer

Cooking Controller will power-up, perform memory
check and then an audible alarm sounds. The message

“POWER FAILURE [PRESS START TO PREHEAT]”

shown on the

Upper OLED Display

④

This is

normal

, intended to prevent the Fryer from beginning to

heat after a power interruption without being attended
by an operator. Pressing the

[START]

key

⑤

silences

the alarm and puts the Fryer into the

PREHEAT

state.

The cook settings shown on the

Upper OLED Display

will be the last used. The Controller will indicate that
Fryer is heating, but until the

Heat Switch

①

placed in the

[HEAT]

position, the heating elements

will not be energized.

DO NOT

place

Heat Switch

the

[HEAT]

position until the fry vat has been filled with

cooking oil.

3. See

Section 5.2, Cooking Procedures

5.1.9

PASSWORD Protection

It is possible to add

PASSWORD

protection for certain Controller functions and settings. This feature is a

FACTORY

SETTING

that is typically

DISABLED

. If

PASSCODE ENABLE

is set to

[ON]

, User is prompted to enter a password

before adding or editing

Menu Item Presets

, entering or changing a manual cook time setting, or accessing the

User

Settings Menu

If you desire to have Password protection enabled, or have questions concerning this feature, call

Giles Technical

Services at 800.554.4537

to request the passcode and instructions as to how to enable this feature.

5.1.10.

Power Up Procedure

Summary of Contents for EOF Series

































































































































Search results

Summary of Contents for EOF Series

Reviews:

Related manuals for EOF Series

Brands by name

Popular brands

GILES EOF Series, Operation & Service Manual

Search results

Summary of Contents for EOF Series

Reviews:

Related manuals for EOF Series

Brands by name

Popular brands