Gilera Runner RST 50 SP, Service Station Manual, Page: 53 / 183

CHECK CONTINUITY
Specification Desc./Quantity
1 White cable-frame continuity
2 White cable-engine continuity
Ignition circuit
All the control operations of the system that require
the disconnection of cables (checks of the con-
nections and the devices making up the ignition
circuit) must be done with the engine off: if this is
not done, the controls might be irreparably dam-
aged.
Stator check
- Using a tester, check the resistance between the
red-ground and green-ground terminal.
N.B.
VALUES ARE STATED AT AMBIENT TEMPERATURE. A
CHECK WITH THE STATOR AT OPERATING TEMPERA-
TURE LEADS TO VALUES HIGHER THAN THOSE STATED.
Electric characteristic
Stator : green - ground
~ 1
Ω
(Stator)
Pick-Up: red - ground
approx. 170
Ω
(Pick-Up)
Voltage regulator check
The malfunctioning of the voltage regulator might cause the following problems depending on the type
of fault:
Runner RST 50 SP
Electrical system
ELE SYS - 53