Gilera Runner RST 50 SP, Service Station Manual, Page: 31 / 183

Check
To check the level of oil in the hub, proceed as
follows:
1. Bring the vehicle to a flat surface and place
it on the stand;
2. Remove the dipstick " A " dry it on a clean
cloth, the reinsert it, screwing it in all the
way ;
3. Remove the dipstick again, checking that the
oil level reaches the second notch from
the bottom ;
4. Screw the dipstick back in, checking that it is
locked in plac
5. e;
CAUTION
USING THE ENGINE WITH INSUFFICIENT LUBRICATION
OR WITH THE WRONG LUBRICANTS MAY INCREASE
WEAR AND TEAR ON THE MOVING PARTS AND MAY
CAUSE SERIOUS DAMAGE.
CAUTION
USED OILS CONTAIN SUBSTANCES HARMFUL TO THE
ENVIRONMENT. FOR OIL REPLACEMENT, CONTACT AN
AUTHORISED SERVICE CENTRE, WHICH IS EQUIPPED
TO DISPOSE OF USED OILS IN AN ENVIRONMENTALLY
FRIENDLY AND LEGAL WAY.
N.B.
THE NOTCHES ON THE HUB OIL LEVEL DIPSTICK, EX-
CEPT THOSE INDICATING THE MAXIMUM AND MINIMUM
LEVELS, REFER TO OTHER MODELS BY THE MANUFAC-
TURER, AND HAVE NO SPECIFIC FUNCTION FOR THIS
MODEL.
Recommended products
AGIP ROTRA 80W-90 Rear hub oil
SAE 80W/90 Oil that exceeds the requirements of
API GL3 specifications
Characteristic
Rear hub oil
Quantity: approx. 75 cm³
Runner RST 50 SP
Maintenance
MAIN - 31