Gilera Runner RST 50 SP, Service Station Manual, Page: 35 / 183

Top-up
Proceed as follows:
1. rest the vehicle on its centre stand with the han-
dlebars perfectly horizontal;
2. remove the rear-view mirrors;
3. remove the front handlebar cover;
4. remove the tank cover « A » loosening the two
fixing screws « B » and restore the level using only
the prescribed fluid without exceeding the maxi-
mum level.
Under normal climatic conditions, the liquid should
be replaced every two years. This operation must
be carried out by trained technicians, please con-
tact an Authorised Piaggio-Gilera Service Cen-
tre
CAUTION
TOP UPS SHOULD ONLY BE CARRIED OUT WITH DOT 4
CLASSIFIED BRAKE FLUID.
CAUTION
THE BRAKING CIRCUIT FLUID IS HIGHLY CORROSIVE.
THEREFORE, WHEN TOPPING IT UP, AVOID LETTING IT
COME INTO CONTACT WITH THE PAINTED PARTS OF
THE VEHICLE. THE BRAKING CIRCUIT FLUID IS HYGRO-
SCOPIC, THAT IS, IT ABSORBS HUMIDITY FROM THE
SURROUNDING AIR. IF MOISTURE CONTAINED IN THE
BRAKE FLUID EXCEEDS A CERTAIN VALUE, THIS WILL
RESULT IN INEFFICIENT BRAKING.
WARNING
IN NORMAL CLIMATIC CONDITIONS IT IS ADVISABLE TO
REPLACE THE ABOVE-MENTIONED FLUID EVERY 2
YEAR. NEVER USE BRAKE FLUID CONTAINED IN CON-
TAINERS WHICH ARE ALREADY OPEN OR PARTIALLY
USED.
Recommended products
AGIP BRAKE 4 Brake fluid
FMVSS DOT 4 Synthetic fluid
Runner RST 50 SP
Maintenance
MAIN - 35