Gigaset 1054isdn User Instructions Download Page 106

Page: 106 / 191

102

1054I-7A.FM

Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619

10.06.1999

Operating the Comfort Mobile Unit

Outgoing Call

En-bloc dialing allows you to review the entered external call number in the display before dial-

ing.

The comfort mobile unit is in the non-active

mode.

Enter external call number.

It will be displayed oversized, here 1234567.

if necessary, correct with

Press the phone key within 30 seconds.

After this you will hear the dial tone and the

call will be dialed.

You hear the ring tone.

The subscriber answers.

You conduct the call...

To terminate the call:

Press the phone key or return the mobile

unit to the battery charger.

In the display you will see the duration of

the call

Note:

●

The en-bloc dialing number can have a maximum of 20 digits.

●

The dialogue key

has no meaning for the Euro-ISDN base connection.

Dialing Externally with the Key Pad as En-Bloc Dialing

TEL.BOOK

Station 1

REDIAL.

1234567_

WAHLW.

PAUSE

External

12345678

External

12345678

CONSLT.

00:03:21

PAUSE

Summary of Contents for 1054isdn
































































































































































































Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands

Gigaset 1054isdn, User Instructions

Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands