Gigaset 1054isdn User Instructions Download Page 165

Page: 165 / 191

1054I-09.FM

161

Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619

10.06.1999

Multicell System

Comfort Mobile Unit

1. On the base station:

Press the registration key on the base station

with a pointed object (e.g. pencil, pen),

The registration key starts to blink.

2. After this, on the mobile component (within 1 minute):

Press the F key;

Main menu is displayed.

Scroll the main menu with NEXT until “Set-

tings“ is in the 1st line and select with OK.

Select “Registrate“ in the next menu.

Scroll to find the base stations.

By selecting the base station you determine

on which base station your mobile unit will

be operated.

Press this. The mobile unit searches for the

next available base station.

Enter the 4 digit system code (default set-

ting “0000“).

If needed, correct with

Confirm with OK if you want the comfort

mobile unit on the base station with this

number.

Press this if you do not want to registrate.

Select one of the available internal numbers

(e.g., “4“).

In order to use the multicell system you

should registrate the mobile unit using the

same internal number on all other base sta-

tions.

Registrating the Comfort Mobile Unit on Multiple Base Station

Registration key

Phone book

Redial

Telephone lock

Settings

Registrate

Station 1

Station 2

Station 3

Registration

Srch. Station 1

Enter

system code:

* * - -

Registrate

Station 1

...

Enter

Internal no.:

2 4 5 6 7 8

Continued

Summary of Contents for 1054isdn
































































































































































































Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands

Gigaset 1054isdn, User Instructions

Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands