Gigaset 1054isdn User Instructions Download Page 123

Page: 123 / 191

1054I-7A.FM

119

Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619

10.06.1999

Operating the Comfort Mobile Unit

Switching Functions

You can forward an external call to another

external

subscriber.

There are three types of external call forwarding (see also “Glossary“, page 171):

●

immediate,

●

when busy,

●

delayed (after 5 rings).

The external call forwarding function can only be used on multiple device connections together

with multiple subscriber numbers. Call forwarding can be set for the multiple subscriber number.

The mobile unit is in non-active mode.

Press F key;

Menu is displayed.

Scroll the main menu with NEXT until “Ser-

vice“ is in the 1st line and then select with

OK.

In the next menu scroll with NEXT until

“Forwarding on“ is in the 1st line and then

select with OK.

The menu for selecting the call forwarding

function is displayed.

(complete menu left).

The individual menu items are located with

NEXT.

Use OK to select.

Select and activate external, immediate call

forwarding.

Set and activate external call forwarding

when busy.

Set and activate external call forwarding

with delay.

After selecting one of the above described

options a list of multiple subscriber num-

bers will be displayed from which you can

choose for the target of the forwarded call.

Enter the external call numbers to whom
you want to forward calls.

After establishing a forwarded call you will pay the costs for the connection from your

phone to the destination or the forwarded call.

Example:

You can use the external call forwarding function for:
External, direct call forwarding

e.g., on holiday.

External call forwarding when busy

e.g., to the secretary.

External call forwarding with delay (if no one answers)

e.g., to home, evenings.

External Call Forwarding

Phone book

Number redial

Telephone lock

Service

Forwarding on

Cancel call park

Fowarding on

Sel. call enable

Internal

External direct

External busy

Internal

External direct

Extern busy

Ext. with timeout

- - - - - - - - - - - -

External direct

External busy

Ext. with timeout

12345678

23456789

- - - - - - - -

External direct

12_

Phone No.?

Summary of Contents for 1054isdn
































































































































































































Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands

Gigaset 1054isdn, User Instructions

Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands