Gigaset 1054isdn User Instructions Download Page 146

Page: 146 / 191

142

1054I-7A.FM

Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619

10.06.1999

Operating the Comfort Mobile Unit

Mobile Settings

Press the F key; Main menu is displayed.

Scroll the main menu with NEXT until...

“Tones“ is in the 1st line and then select

with OK.

The menu for setting the tones is displayed

(complete menu left).

You can use NEXT and OK to select and edit

the following options:

Acknowledgement tone when you press a

key

(key touch tone)

Touching the key is signaled in the current

mode; here not active.

After pressing ON you can deactivate and

reversed

The following settings are made using the same procedure as just described.

Batteries are almost empty.

Operational- range limitation.

Successful completion of a procedure (positive receipt tone).

Incorrect entry (negative receipt tone).

Mobile unit has connected successfully to a

base station.

Activate / Deactivate Advisory and Warning Tones

Phone Book

Number redial

Telephone lock

Key click

Batt.warn. tone

Range tone

Acknowledg tone

Error tone

Sync.tone

- - - - - - - - - - - - -

Tones

Key click

Batt.warn tone

Acknowledg. tone

Error tone

Range tone

Sync. tone

Key click

Batt.warning tone

Range tone

Key click

SAVE

Key click

OFF

Summary of Contents for 1054isdn
































































































































































































Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands

Gigaset 1054isdn, User Instructions

Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands