Gigaset 1054isdn User Instructions Download Page 24

Page: 24 / 191

1054I-02.FM

Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619

10.06.1999

Installation

Standard Mobile Unit

Each mobile unit must be registrated at the base station. In doing this, please note the following:

1. The mobile unit must be switched off.

If necessary, turn it off by pressing the

key until the display is clear.

2. Press the registration key on the base station.

Use a pointed object for this, for example,

a pencil or a pen.

The registration key will start to blink.

3. Then (within 1 minute),on the mobile unit:

The mobile unit must be turned off.

Press the

key and

hold down

(This stipulates the

base station number)

Additionally

Push the ON key until the display on the screen

appears.

Enter the system code.

The system code at the time of delivery

is 0000.

Complete the entry of the system code.

Please wait until the connection to the

base station has been established.

At the time of first registration, all availa-

ble internal station numbers appear in

the display, here, 1 to 8.

...

(

Enter the desired internal station num-

ber of the mobile unit; i.e. push one of

the number keys between 1 and 8;

here, for example, 2.

The mobile unit is registrated.

Note:

●

Up to

8 mobile units can be registrated on one base station.

●

If you have already registrated 8 mobile units, three dashes will be displayed during

the registration process after you enter the system code and a negative tone sounds.

●

Deactivating a mobile unit, see page 81.

Registrating a Standard Mobile Unit at a Base Station

Registration key

1---

12345678

Summary of Contents for 1054isdn
































































































































































































Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands

Gigaset 1054isdn, User Instructions

Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands