Gigaset 1054isdn User Instructions Download Page 126

Page: 126 / 191

122

1054I-7A.FM

Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619

10.06.1999

Operating the Comfort Mobile Unit

Switching Functions

If you call someone externally whose line is busy, you can activate the “automatic call back“

function. As soon as the desired connection is free, you will be called back automatically. To use

the automatic call back function, you must have contracted the ISDN service feature “automatic

call back“ from the Deutschen Telekom AG (at the time of the release of these User Instructions

this function was not yet available).

If this function is not available the dialog key CALLBACK is suppressed.

You have an external connection.

The called connection is busy.

Press this to activate the automatic call back

function.

You will see this display for 2 seconds as

confirmation.

Note:

●

The callback function will be deactivated automatically once the connection is made.

The comfort mobile unit is in the non-active

mode.

You have an outside line and can see that a

system function is active, for example, the

automatic call back.

Press the F key.

Menu is displayed.

In the menu use OK to select “System-

funct. set.”

Scroll the next menu with NEXT...

until “Ext.callback“ is in the 1st line and

then select with OK.

Use OFF to deactivate the automatic call

back function.

You will see this display for 2 seconds as a

confirmation

Activate Automatic External Call Back

Deactivate Automatic External Call Back

External

12345678

CALLBAC

CALLBACK

Callback to Ext.

activated

fnct. set. act

Please dial

TEL.BOOK REDIAL

Systemfunct. set

Handset volume

Cancel call park

Systemfunct.set.

Ext.callback

Int.call forward.

Ext.call forward.

Sel.call enable

External callback

activated

OFF

AUS

Ext. callback

dectivated

Summary of Contents for 1054isdn
































































































































































































Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands

Gigaset 1054isdn, User Instructions

Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands