Gigaset 1054isdn User Instructions Download Page 55

Page: 55 / 191

1054I-06.FM

Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619

10.06.1999

Operating the Standard Mobile Unit

Switching Functions

With your ISDN system you have the ability, to execute both internal and external consultation

functions.
Start consultation with:

for an

internal

consultation call to another subscriber on Gigaset

1054isdn.

for an

external

consultation call.

You are connected externally.

Press internal key.

Your internal number is displayed,

here 1.

Enter the desired subscriber number;

here 2.

or call all internal subscribers:

Press save key.

You will hear the internal ring tone, and a

subscriber will answer; here number 2.

You can speak with the internal sub-

scriber.

Transferring a call:

Press the phone key or replace the

mobile unit in the battery charger.

or complete the internal consultation call and resume the external call:

Press the signal key.

You are connected to the external sub-

scriber again. You can complete the

external call.

Note:

●

After dialing the internal subscriber number, you can transfer the call immediately by “hang-

ing up“ before the internal subscriber has answered.

●

If the subscriber doesn’t answer within 30 seconds, the caller will be returned to you.

Consultation / Call Transfer

Internal Consultation

CD F

12345678

CD F G

0123

CD F

12345678

Summary of Contents for 1054isdn
































































































































































































Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands

Gigaset 1054isdn, User Instructions

Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands