Gigaset 1054isdn User Instructions Download Page 134

Page: 134 / 191

130

1054I-7A.FM

Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619

10.06.1999

Operating the Comfort Mobile Unit

Locking

By entering up to three 16 digit call numbers you can determine, which subscribers you want to reach

you. The calls of all subscribers that have different call numbers will not be put through to you. If the

block is active, then it will be displayed on the mobile unit.

This block will not work, when the caller has suppressed the call number transmission to you (see Glos-

sary page 171), or when the call is coming from a non ISDN subscriber.

For better control we recommend that you activate the call number display.

The comfort mobile unit is in the non-active

mode.

Press

Main menu is displayed.

Use NEXT to scroll in the main menu...

until “Service“ is in the 1st line and then

select with OK.

Scroll the next menu...

until “Sel.call enable“ is in the 1st line and

then select with OK.

The menu for setting a block for incoming

calls is displayed.

(complete menu left).

Use NEXT and OK to select and edit the fol-

lowing options:

Activate / deactivate a block for undesired

calls.

If a call number is not programmed, then all

calls will be blocked.

Check / change the call numbers for undes-

ired calls.

Enter call numbers for undesired calls.

Delete individual call numbers for undesired

calls.

Blocking Unwanted Calls

Phone Book

Number redial

Telephone lock

Service

Sel.call enable

Call enable

Phone no. list

New entry

Delete phone no.

- - - - - - - -

Cancel call park

Call forward. on

Sel.call enable

Call enable

Phone no. list

New entry

Call enable

Call no. list

New entry

Delete call no.

Summary of Contents for 1054isdn
































































































































































































Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands

Gigaset 1054isdn, User Instructions

Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands