Gigaset 1054isdn User Instructions Download Page 117

Page: 117 / 191

1054I-7A.FM

113

Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619

10.06.1999

Operating the Comfort Mobile Unit

Telephone Book

Change or check entries.

Scroll for the names that you want to

change with NEXT and select with OK

The call number will be offered for change

first.

(if needed, delete with back space

)

... then the name.

Finish with SAVE.

Delete individual entries.

Use NEXT to search for and mark the entry

you want to delete.

Press this.

The entry is deleted.

Delete all entries in the telephone book at

one time.

This option is protected by you mobile unit

PIN.

Change entry

BAIER

BRUNNER

C˜SAR

01234567_

BAIER

Phone No.?

01234567

BAIER_

Name?

SAVE

Delete entry

ANTON

BERTA

C˜SAR

DELETE

Delet. Phonebook

entries in

Delete all

phone book?

Summary of Contents for 1054isdn
































































































































































































Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands

Gigaset 1054isdn, User Instructions

Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands