Gigaset 1054isdn User Instructions Download Page 154

Page: 154 / 191

150

1054I-08.FM

Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619

10.06.1999

Operating Other Devices

Exchange Functions

If you call someone externally whose line is busy, you can activate the “automatic callback“ func-

tion. As soon as the desired connection is free, you will be called back automatically. To use the

automatic callback function, you must have contracted the ISDN service feature “automatic call-

back“ from the German Telekom AG.

You place an external call and hear the busy signal.

7487

Press these keys one after another.

The external automatic callback function is set.

Replace hand set.

The external automatic callback function is active.

Note:

●

The callback function is deactivated automatically when the connection is established.

The automatic callback function is active.

Lift hand set.

7487

Press these keys one after another.

The external automatic callback is deactivated.

Replace hand set.

The external automatic callback is no longer active.

You can park a call using a “park number“ (interrupt a call without breaking the connection) and

then pick it up at any another telephone, for example, a mobile unit, using the same park number

(unpark). The maximum parking duration is 3 minutes. The parking function is only possible on

the same multiple device connection (see also Glossary page 171).

You have an external connection.

Press these keys one after another to start the park function.

Press a number key to assign a park number.

Press 7 to park the call.

Replace hand set.

The connection is parked using the assigned number.

Activate External, Automatic Callback

Dedicative External, Automatic Callback

Parking an External Call

742

Summary of Contents for 1054isdn
































































































































































































Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands

Gigaset 1054isdn, User Instructions

Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands