Gigaset 1054isdn User Instructions Download Page 69

Page: 69 / 191

1054I-06.FM

Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619

10.06.1999

Operating the Standard Mobile Unit

Locking

With the system lock you can lock your base station. It is then not possible to place any calls.

Exception

: Calls with emergency numbers are possible, provided that they are stored. Four 16

digit emergency numbers can be stored (page 66).

Incoming calls can be accepted in the locked mode.

w#“$o

Press these keys one after another and

enter the

system code

(default setting 0000).

Each entered number replaces a dash in

the display.

Previous setting will be displayed.

activate

the lock press the

key.

deactivate

the lock press the

key

(default setting)

Press the save key.

The system lock is now active or not

active.

Note:

●

If you have set the system lock with emergency numbers together with a telephone lock

with direct dial, then it is not possible to dial.

Exception: Emergency number is identical with the direct dial number.

Activate / Deactivate the Lock for Outgoing Calls (System Lock)

2 ____4

__4

Summary of Contents for 1054isdn
































































































































































































Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands

Gigaset 1054isdn, User Instructions

Search results

Summary of Contents for 1054isdn

Reviews:

Related manuals for 1054isdn

Brands by name

Popular brands