GEZE TSA 160 NT F, Wiring Diagram

Page: 48 / 64

TSA 160 NT
48
Service menu
Designation Setting values Explanation
KB Current state KB
Z-> inactive
K->normally closed contact
Display
KB contact type Not used Input KB without function
Normally opened contact
Normally closed contact
KI Current state KI
Z-> inactive
K -> normally opened contact
A -> 0 s
Display
KI contact type Not used Input KI without function
Normally opened contact
Normally closed contact
KI delay
0
.. 90 × 0.1 s
KA Current state KA
Z-> inactive
K -> normally opened contact
A -> 0 s
Display
KA contact type Not used Input KA without function
Normally opened contact
Normally closed contact
KA delay
0
.. 1 .. 90 × 0.1 s
AU Current state AU
Z-> inactive
K -> normally opened contact
Display
AU contact type Not used Input AU without function
Normally opened contact
Normally closed contact
analogue MPS
DO Current state DO
Z-> inactive
K -> normally opened contact
Display
DO contact type Not used Input DO without function
Normally opened contact
Normally closed contact
PE1 Current state PE1
Z-> inactive
K -> not used
F -> not used
Display
PE1 function
Not used
Input PE1 without function
OFF NO Switchover to OFF (normally opened contact)
Switchover summer NO For the connection of a push button for the sum-
mer function. Only for switching from 1-leaf to
2-leaf opening, not for actually opening the door.
Switchover winter NO For the connection of a push button for the winter
function. Only for switching from 2-leaf to 1-leaf
opening, not for actually opening the door.
Sabotage NC Permanently switched. If the contact is inter-
rupted KB is not evaluated in the night mode of
operation. All other functions remain the same.
Closing position GF NO Closing position contact of the door leaf
à
For 1-leaf Door
à For 1-leaf Door drive with manual passive leaf
(door closer):
Closing position contact of the active leaf
à
For 2-leaf door:
Active leaf contact to GF control, passive leaf
contact to SF control