GEZE TSA 160 NT F, Wiring Diagram

Page: 47 / 64

TSA 160 NT
47
Service menu
23.5.5 Movement parameters
Designation Setting values Explanation
Hold-open times 2-leaf (summer) 0 .. 1 .. 10 .. 12 .. 20 .. 25 .. 50 60 s
1-leaf (winter) 0 .. 1 .. 10 .. 12 .. 20 .. 25 .. 50 60 s
Mechanical contact
0 ..
1
.. 10 .. 12 .. 20 .. 25 .. 50 60 s
With activation via KB
Close delay GF 0 ..
1
.. 15 16 s Time starts to expire as soon as the
passive leaf starts to close.
16: Setting in accordance
with DIN 18650/EN 16005.
Time starts to expire as soon as the pas-
sive leaf has reached the closing position
(closing position limit switch necessary).
Dyn extension Yes Automatic extension of the hold-open
time at increased usage frequency
No
Delay SF 0 .. 1 .. 10 .. 12 .. 20 .. 25 .. 50 60 0.1 sec.
Motor follow-up time
0
.. 1 .. 10 .. 20 .. 50 × 0.1 s Can only be set for TSA 160 NT Invers.
After the limit switch has been reached
the motor is activated again for the
duration of the run-on delay set.
Push and Go
No
Only with closing position limit switch.
(limit switch not necessary
for TSA 160 NT Invers)
Yes
23.5.6 Signals
Input signals
Designation Setting values Explanation
SI1 - terminal SIS Current state SI1 - terminal SIS1
Z-> inactive
K->normally closed contact
F -> SIS rev
Display
SI1 contact type Not used Input SIS without function
Normally closed
contact
SI1 function SIS rev Reverse when closing
SIS and KI Reverse when closing,
KI in closing position
SIS and KA Reverse when closing, KA in closing position
SI3 - terminal SIO Current state SI3 - terminal SIO1
Z-> inactive
K->normally closed contact
F -> SIS rev
Display
SI3 contact type Not used Input SIO without function
Normally closed
contact
SI3 function
SIO stop
Stop when opening
SIO SF GF Use stop function from GF or SF
Bolt contact type Current state Bolt contact type
Z-> inactive
K -> normally opened contact
F-> lock contact
Display
Bolt contact type Normally opened
contact
Normally closed
contact