TSA 160 NT
52
Service menu
Designation
Setting values
Explanation
Delete current
faults
No
Clear currently active faults
Yes
Clear old faults
No
Clear old faults
Yes
Default setting
No
Yes
Reset all the values to the factory settings
Delete maintenance
No
Yes
Clear the maintenance values
Password
Change PW S1
Password old
0000
Password new
----
Password PW S1:
for access to the service menu with ST220.
Password PW TPS/DPS:
is used to enable the TPS or DPS instead of
enabling via a key switch. Disabling reoc-
curs automatically after 1 minute without
push button activation.
The first digit specifies how often the key
has to be activated and the second dig-
it how often the key
has to be activated
to release operation of the TPS / DPS.
Entry of the password with ST200:
X
Change digit with
or
.
X
Confirm digit and change to next posi-
tion with
.
à
Abort with
x
.
à
Display of the current position by the
asterisk under it.
X
After completing entry, press
to accept
the password.
After 1 minute without a button being
pressed or when the service menu is
accessed again, the password is required
before changes to the operating mode
setting or to the parameter settings can
be carried out.
The password has to be set separately for
the active leaf and passive leaf drive. The
active leaf drive and the passive leaf drive
can have different passwords.
Important information:
à
When the password for ST220 is set, ac-
cess to the service menu via DPS is no
longer possible.
à
If the password has been forgotten, a
special flash file with which the pass-
word on the control can be reset to 00
has to be requested from GEZE.
à
The password cannot be deleted by
installing a new software version.
Changing PW DPS TPS Password old
00
Password new
--
Language
deutsch
english
francais
svensk
Summary of Contents for TSA 160 NT F
Page 61: ...TSA 160 NT 61 Fault messages ...
Page 62: ...TSA 160 NT 62 Fault messages ...
Page 63: ...TSA 160 NT 63 Fault messages ...
