GE-NUTRI USER’S GUIDE
GE-NUTRI
Section C-39
F e e d # P r o g #
V i s : V i s 1 ( 0 0 0 0 )
P . S w i t c h : 1
E m p t y B i n : N o
B a c k u p : 2
P o s i t i o n : 1 0 0 %
MAIN MENU
SETTINGS PROGRAM {1-4}
FEEDS PROGRAM {1-4}
FEED {1-4} PROGRAM {1-4}
1.
This parameter is used to assign a feed auger to the feed. During a cycle, the
feed auger will only be active if its assign feed type is selected for the cycle.
2.
This parameter shows the bin code of the feed’s assigned feed auger.
3.
This parameter allows you to choose which proximity switch will be assigned
to the feed. This parameter varies from 1 to 4 in multi-feed and feed auger
mode or 1 to 8 in feed auger drop mode. In chain feeder and chain feeder
drop mode, there is no choice of proximity switch since only one proximity
switch is being used.
4.
This parameter allows you to specify if the bin containing the feed is empty. If
this parameter is set to "
Yes
", the backup feed will be directly used.
5.
This setting is used to select the backup feed auger for a feed. If the setting
is set to "
None
", the feed does not have a backup. If the assigned feed auger
engages its feeding time alarm (multi-feed mode), or its minimum or
maximum time, the backup feed auger selected with this parameter will be
activated instead. A feed auger can only be used as backup only once per
cycle. This setting can take the value "
None
", 1 to 4.
6.
This parameter allows you to choose the actuator position when the
corresponding feed is being distributed. This setting is adjustable by
increments of 1% to 0% to 100%.
[1]
[3]
[5]
[2]
[4]
[6]
Summary of Contents for GE-NUTRI
