GE-NUTRI INSTALLATION
GE-NUTRI
Section B-13
-
The backup system and alarm must be thoroughly tested and verified as
working properly before using the ventilation system.
Mounting
-
The enclosure must be mounted in a location that will allow the cover to be
completely opened.
-
Fasten the four brackets to the four mounting holes on the back of the
enclosure using the four screws provided with the brackets.
-
Then mount the enclosure on the wall by inserting screws through the
brackets’ adjustment slots, into the wall. Make sure to position the enclosure
so that all wires extend out of the bottom section of the enclosure.
-
The bracket slots serve to adjust the position of the controller.
-
Once you have adjusted the controller position, tighten the four mounting
screws. (see figure 1).
FIGURE NO. 1 Mounting Position and Devices
Summary of Contents for GE-NUTRI
