GE-NUTRI USER’S GUIDE
Section C-34
GE-NUTRI
6.
These parameters display the current position of actuators. If the regulator
detects a defective potentiometer, the corresponding parameter will display
"
*Po
". If the cooling function is enabled, the current position will alternate
with "
*RE
". If the regulator cannot read the value of the potentiometer, the
corresponding parameter will display "
*ER
". The current positions are
displayed with a resolution of 1% -99% to 127%. There can be up to 2
actuators in multi-feed, feed auger drop and chain feeder drop mode.
7.
These parameters display the requested positions by the program to the
actuators. The requested positions are displayed with a resolution of 1% to
0% to 100%. There can be up to 2 actuators in multi-feed, feed auger drop
and chain feeder drop mode.
8.
This parameter is used to access the
FEED AUGER {1-8}, FEEDER
HISTORY
screen (page C-35) of the feeder. For feed auger and feed auger
drop mode there is no feeder.
9.
This parameter displays the status of the feeder. It indicates if the feeder is
running. The input can be "
ON
" or "
OFF
".
10.
This parameter displays the status of the output of feeder. It indicates if the
feeder has a request. The output can be "
ON
" or "
OFF
".
Summary of Contents for GE-NUTRI
