![background image](http://html1.mh-extra.com/html/genius/ge-nutri/ge-nutri_user-manual_2212730031.webp)
GE-NUTRI USER’S GUIDE
GE-NUTRI
Section C-31
6.
These parameters are used to access the
PROGRAM STATUS {1-4}
screen
(page C-32) of the corresponding program.
7.
These parameters are used to access the
SETTINGS PROGRAM {1-4}
screen (page C-37) of the corresponding program.
8.
These parameters display the feed type actually being distributed by the
corresponding program. These parameters are used to access the
FEED
SUMMARY
screen (page C-55) of the corresponding program.
9.
These parameters are used to access the
BACKUP PROGRAM {1-4}
screen (page C-51) of the corresponding program.
10.
This parameter allows the changing of the program status. It can be “
Auto
”,
“
Pause
”, “
Stop
” or “
Cycles Stop
”. When this parameter is set to “
Auto
”,
the outputs assigned to this program will activate accordingly to the current
cycle. When the mode is “
Pause
”, all the program operations are suspended.
When set to “
Stop
”, the users must press select for the parameter change to
“
Cycles Stop
”. If the parameter is at “
Cycles Stop
”, no cycle starts and
if there is an active cycle, it stops.
Summary of Contents for GE-NUTRI
