![background image](http://html1.mh-extra.com/html/genius/ge-nutri/ge-nutri_user-manual_2212730011.webp)
GE-NUTRI INSTALLATION
GE-NUTRI
Section B-11
This section will inform the electrician on proper wiring and installation
procedures for the GE-NUTRI Controller.
The manufacturer recommends that the following installation instructions be
followed to as closely as possible, and that all work be performed by a certified
electrician. Failure to do so may void the warranty.
Unpacking
Unpack the GE-NUTRI Controller and inspect contents for damage. Should the
contents appear to be damaged, contact your local distributor to return the
equipment.
The package should contain the following standard items:
1 GE-NUTRI control
4 Brackets / 4 screws
1 Installation / User’s Guide
Mounting hardware required
This is the list of the mounting hardware needed, which is not included with the
product:
Shielded two-wire cable, AWG #22 (to extend probes)
Shielded two-wire twisted pair cable, AWG #22 (used for communication)
see electrician note for capacitance selection.
4 screws (to hang the unit onto the wall)
Screwdrivers
Soldering iron kit or approved sealed connectors
Drill and hole saw kit
Summary of Contents for GE-NUTRI
