![background image](http://html1.mh-extra.com/html/genius/ge-nutri/ge-nutri_user-manual_2212730054.webp)
GE-NUTRI USER’S GUIDE
Section C-54
GE-NUTRI
M a n u a l O v e r r i d e
R T y p e F P B i n S t a t e
1 – F E – 1 - - - - A u t o
2 - F A 1 1 1 1 2 3 4 A u t o
3 – F A 2 4 1 4 5 7 8 A u t o
4 - A 1 O - 1 - - - - A u t o
5 – A 1 C - 1 - - - - A u t o
6 – F E - 2 - - - - A u t o
7 - F A 1 - 2 8 9 4 5 A u t o
8 – F A 2 - 2 0 0 2 3 A u t o
9 – - - - - - - - - - A u t o
1 0 - F E - 3 - - - - A u t o
1 1 - A 1 O - 3 - - - - A u t o
1 2 - A 1 C - 3 - - - - A u t o
MAIN MENU
MANUAL OVERRIDE
1.
These parameters display the type in which the corresponding relay output is
used. The types are
"FE"
for feeder
,
"FA1-8"
for feed auger,
"A1-4O"
for actuator opening,
"A1-4C"
for actuator closing or
"None"
if no logic is
associated to the relay.
2.
These parameters display the feed type for each relay. There is only a feed
type when the relay is assigned to a feed auger.
3.
These parameters display which program the relay is assigned to.
4.
These parameters display the bin numbers of feed augers assigned to the
each relay. A bin number is only display if the relay type is feed auger.
5.
These parameters are used to manually override the calculated activation
demand by the regulator of each relay. When this value is set to
"AUTO"
, the
relay will be activated according to the configuration adjustments. When this
value is set to
"OFF"
, the relay will deactivate. When this value is
"ON"
, the
relay will be activated. When this value is not set to
"AUTO"
, the
corresponding led will blink. When a relay is assign to an actuator, these
parameters are used to manually operate the corresponding actuator output
ignoring the demand calculated by the regulator. When this value is set to
"AUTO"
, the actuator output will be activated according to the configuration
adjustments. When this value is set to
"STOP"
, the actuator output will not
move. When this value is set to
"CLOSE"
, the actuator output will continually
close. When this value is set to
"OPEN"
, the actuator output open
continuously. When the value is between 0% and 100%, the actuator position
will take this value.
[1]
[2]
[3]
[4]
[5]
Summary of Contents for GE-NUTRI
