Genius GE-NUTRI, User Manual

Page: 9 / 76

GE-NUTRI WIRING DIAGRAM
GE-NUTRI Section A-9
Electrician’s notes
(PROBE WIRING) SHIELDED WIRE AWG #22 WITH 16/30 STRANDING, 500ft
(150m) MAXIMUM LENGTH (Ex.: DECA 73-310).
For other probe, refer to specific probe manual for appropriate maximum length
and wire size or use AWG #22, 500ft (150m) MAXIMUM LENGTH.
(COMMUNICATION WIRING) SHIELDED, TWISTED PAIR (8 TWIST/FT). MAX
LENGTH FOR 350PF/M CABLE : 500FT (150M). MAX LENGTH FOR 89PF/M
CABLE : 820FT (250M).
HIGH VOLTAGE WIRE INSTALLED ACCORDING TO LOCAL WIRING CODE.
INSTALL LOW VOLTAGE WIRES (PROBES, COMPUTER LINK OR
POTENTIOMETER WIRES) AT LEAST 12 INCHES (30cm) AWAY FROM
HIGH VOLTAGE WIRES (120/230VAC, 24VDC). ALWAYS CROSS HIGH AND
LOW VOLTAGE WIRES AT A 90-DEGREE ANGLE.
RELAYS: 12A @ 240VAC RESISTIVE, MOTOR 1HP @ 240VAC, 1/2HP @
120VAC AT EACH OUTPUT.
1 WIRE ONLY PER GREEN TERMINAL. USE WIRE CONNECTOR IF YOU
WANT TO CONNECT MORE THAN 1 WIRE, NO BIGGER THAN AWG #12,
NO SMALLER THAN AWG #28.
CHECK INSTALLATION SECTION FOR ALARM WIRING.
USE SHIELD FOR SHIELDING PURPOSE ONLY. CONNECT 1 END AND 1
END ONLY OF THE SHIELD TO THE CONTROL CIRCUIT COMMON END .
NEVER LEAVE BOTH ENDS OF THE SHIELD UNCONNECTED. NEVER
CONNECT BOTH ENDS OF THE SHIELD TO COMMON . THE USE OF A
SHIELD FOR ALL PROBES AND POTENTIOMETERS IS MANDATORY.
COMMUNICATION WIRING SHIELDED, TWISTED PAIR (8 TWIST/FT). MAX
LENGTH FOR 350PF/M CABLE : 160FT (50M). MAX LENGTH FOR 89PF/M
CABLE : 650FT (200M).
JP1 – JUMPER MUST BE INSTALLED ON PIN 1-2 (STANDARD)
JP2 – JUMPER MUST BE INSTALLED ON PIN 1-2 (STANDARD)
JP3 – JUMPER MUST BE INSTALLED ON PIN 1-2 (ID 1)
JP4 – JUMPER MUST BE INSTALLED ON PIN 2-3 (19200bp)
X1399 BOARD PROGRAM VERSION MUST BE V4 OR HIGHER.
1
2
3
5
8
9
4
6
7
10
11