User Manual
Geneko GWR High Speed Router Series
76
Management – Simple Management Protocol (SNMP)
SNMP, or Simple Network Management Protocol, is a network protocol that provides network
administrators with the ability to monitor the status of the Router and receive notification of any critical events as
they occur on the network. The Router supports SNMP v1/v2c and all relevant Management Information Base II
(MIBII) groups. The appliance replies to SNMP Get commands for MIB II via any interface and supports a custom MIB
for generating trap messages.
Figure 57 – SNMP configuration page
SNMP Settings
Label
Description
Enable SNMP
SNMP is enabled by default. To disable the SNMP agent, click this option to unmark.
Get Community
Create the name for a group or community of administrators who can view SNMP
data. The default is
public
. It supports up to 64 alphanumeric characters.
Service Port
Sets the port on which SNMP data has been sent. The default is 161. You can specify
port by marking on user defined and specify port you want SNMP data to be sent.
Service Access
Sets the interface enabled for SNMP traps. The default is Both.
Reload
Click
Reload
to discard any changes and reload previous settings.
Save
Click
Save
button to save your changes back to the GWR-HS Router and
enable/disable SNMP.
Table 27 – SNMP parameters
Summary of Contents for GWR High Speed Router Series
Page 1: ...GWR High Speed Cellular Router Series User Manual version 1 1 Date June 2014...
Page 26: ...User Manual Geneko GWR High Speed Router Series 26 Figure 17 DHCP Server configuration page...
Page 61: ...User Manual Geneko GWR High Speed Router Series 61 Figure 38 Modbus gateway configuration page...
