Geneko GWR High Speed Router Series, User Manual

Page: 50 / 133

User Manual
Geneko GWR High Speed Router Series
50
Point-to-Point Tunneling Protocol (PPTP)
The Geneko Router can be used as a PTPP (Point-to-Point Tunneling Protocol) client. PPTP uses a control
channel over TCP and a GRE tunnel operating to encapsulate PPP packets.
Figure 30 – PPTP configuration page
VPN Settings / PPTP Tunneling Parameters
Label Description
Number Selected tunnel number. Number of PPTP tunnels is limited to 5
Enable
Option for tunnel enabling
Tunnel Name
Unique tunnel identifier
PPTP Server IP Address
or Hostname
IPv4 address of remote PPTP server
Remote network After the tunnel is established, route to this network will be added
Remote netmask
Netmask of remote subnet to route
Domain Some PPTP servers require domain name for authentication
Username Username to authenticate local user to remote server
Password
Password to authenticate local user to remote server
Encryption
This option should be leaved enabled to use default MPPE (Microsoft encryption) and
MPPC (Microsoft compression) protocols
Persist
If this option is enabled, tunnel will try to reconne
ct
Maxfail Max number of retries to reconnect. 0 for infinite retries
Debug
Enable extra information in system log
Edit Edit
is used to edit selected tunnel from the table
Delete Delete is used to delete selected tunnel from table