Geneko GWR High Speed Router Series, User Manual

Page: 70 / 133

User Manual
Geneko GWR High Speed Router Series
70
Management – Command Line Interface
CLI (command line interface) is a user text–only interface to a computer's operating system or an
application in which the user responds to a visual prompt by typing in a command on a specified line and then
receives a response back from the system.
In other words, it is a method of instructing a computer to perform a given task by "entering" a command. The
system waits for the user to conclude the submitting of the text command by pressing the
Enter or Return key. A
command–line interpreter then receives, parses, and executes the requested user command.
On router's Web interface, in Management menu, click on Command Line Interface tab to open the
Command Line Interface settings screen. Use this screen to configure CLI parameters Figure 50 – Command Line
Interface .
Figure 50 – Command Line Interface
Command Line Interface
Label Description
CLI Settings
CLI service on serial port This option is configured on Serial port configuration page
Enable telnet service
Enable or disable CLI via telnet service
Enable SSH service Enable or disable CLI via SSH service
View Mode Username Username is predefined to admin
View Mode Password
Password for View mode
Confirm Password Confirm password for View mode
View Mode Timeout Inactivity timeout for View mode in minutes. After timeout, session will auto logout
Edit Mode Timeout
Inactivity timeout for Edit mode in seconds. Note that Username and Password for
Edit mode are the same as Web interface login parameters. After timeout, session will
auto logout
Save Click Save to save your changes back to the GWR-HS Router.
Reload Click Reload to discard any changes and reload previous settings.
Table 25 – Command Line Interface parameters