User Manual
Geneko GWR High Speed Router Series
120
Serial port – example
For connecting serial devices from remote locations to central location serial transparent conversion can
be used. Serial communication is encapsulated in TCP/IP header and on the central location is recognized by the
Virtual COM port application. This way serial communication is enabled between two distant locations.
In the picture below serial communication is achieved over GWR-HS router in client mode on remote
location and Virtual COM port application on central side. As application is in server mode, IP address of the
workstation has to be accessible from the router. In this example that is IP address GWR-HS routers supports both
server and client mode, so you can use one GWR-HS router on both side of communication link (one in server and
one in client mode).
Figure 124– Transparent serial connection
1.
Settings on GWR-HS router
From the main menu on the left side of web interface option SERIAL PORT should be selected and following
page is displayed.
Figure 125– GWR-HS Serial port settings
Option SERIAL PORT OVER TCP/UDP SETTINGS is used for configuration of transparent serial communication.
Configuration parameters are presented in picture below
Summary of Contents for GWR High Speed Router Series
Page 1: ...GWR High Speed Cellular Router Series User Manual version 1 1 Date June 2014...
Page 26: ...User Manual Geneko GWR High Speed Router Series 26 Figure 17 DHCP Server configuration page...
Page 61: ...User Manual Geneko GWR High Speed Router Series 61 Figure 38 Modbus gateway configuration page...
