User Manual
Geneko GWR High Speed Router Series
56
Settings – DynDNS
Dynamic DNS is a domain name service allowing to link dynamic IP addresses to static hostname. To start
using this feature firstly you should register to DDNS service provider. Section of the web interface where you can
setup DynDNS parameters is shown in
Figure 35
.
Figure 35 – DynDNS settings
DynDNS
Label
Description
Enable DynDNS Cilent
Enable DynDNS Client.
Service
The type of service that you are using, try one of: no–ip, dhs, pgpow, dyndns,
dyndns–static, dyndns–custom, ods, easydns, dyns, justlinux and zoneedit.
Custom Server IP
The server IP to connect to.
Custom Server port
The server port to connect to.
Hostname
String to send as host parameter.
Username
User ID
Password
User password.
Update cycle
Defines interval between updates of the DynDNS client. Default and minimum value
for all DynDNS services, except No–IP service, is 86400 seconds. Update cycle value
for No–IP service is represented in minutes and minimum is 1 minute.
Number of tries
Number of tries (default: 1) if network problem.
Summary of Contents for GWR High Speed Router Series
Page 1: ...GWR High Speed Cellular Router Series User Manual version 1 1 Date June 2014...
Page 26: ...User Manual Geneko GWR High Speed Router Series 26 Figure 17 DHCP Server configuration page...
Page 61: ...User Manual Geneko GWR High Speed Router Series 61 Figure 38 Modbus gateway configuration page...
