User Manual
Geneko GWR High Speed Router Series
117
dev-node adap3
secret key.txt
ping 10
comp-lzo
disable-occ
All three configuration files (e.g. Server1.ovpn, Server2.ovpn, Server3.ovpn)
have to be saved in same directory C:\Program Files\OpenVPN\config. Name
of configuration file is name of your OpenVPN tunnel.
e) Workstation where OpenVPN server is installed should have ip route to
subnet which is on the other end of the OpenVPN tunnel. This subnet is
reachable over remote OpenVPN interface which is in this case 2.2.2.2.
Enter following command in the command prompt:
route –p add 192.168.11.0 mask 255.255.255.0 2.2.2.2
first remote location
route –p add 192.168.12.0 mask 255.255.255.0 2.2.2.6
second remote location
route –p add 192.168.13.0 mask 255.255.255.0 2.2.2.10
third remote location
2. GWR-HS router is configured with SIM card which has internet access. Configuration
of OpenVPN is following:
Figure 117 – OpenVPN GWR-HS settings
Where pre-shared secret you paste from the
key.txt
file which you generate on OpenVPN server.
In routing table static ip route to local OpenVPN server network (in this case it is 192.168.2.0/24) should be entered.
Summary of Contents for GWR High Speed Router Series
Page 1: ...GWR High Speed Cellular Router Series User Manual version 1 1 Date June 2014...
Page 26: ...User Manual Geneko GWR High Speed Router Series 26 Figure 17 DHCP Server configuration page...
Page 61: ...User Manual Geneko GWR High Speed Router Series 61 Figure 38 Modbus gateway configuration page...
