User Manual
Geneko GWR High Speed Router Series
28
Mobile Provider. This field cannot be altered.
PIN enabled
Option used when SIM card is locked with PIN code
Enable Roaming
By enabling this option router will be able to connect to roaming network.
Enable operator locking
Option that allows a user to lock a SIM card for a desired operator by specifying PLMN
id of the operator. This option is very useful in border areas since you can avoid
roaming expenses.
Number of retries
Number of unsuccessful connection attempts after which router switches to second
SIM
Enable Failover
(SIM2 Only)
Check this field in order to enable failover feature. This feature is used when both SIM
are enabled. You specify the amount of time after which Failover feature brings down
current WAN connection (SIM2) and brings up previous WAN connection (SIM1).
Persistent connection
Keep connection alive, after Do not exit after a connection is terminated. Instead try to
reopen the connection.
Reboot after failed
connections
Reboot after n consecutive failed connection attempts.
Enable SIM1/SIM2
keepalive
Make some traffic periodically in order to maintain connection active. You can set
keepalive interval value in minutes.
Ping target
This field specifies the target IP address for periodical traffic generated using ping in
order to maintain the connection active.
Ping interval
This field specifies ping interval for keepalive option.
Advanced ping interval
This field specifies the time interval of advanced ping proofing.
Advanced ping wait for
a response
This field specifies the timeout for advanced ping proofing.
Maximum number of
failed packets
This field specifies maximum number of failed packets in percent before keepalive
action is performed.
Keepalive action
This menu provides a choice between two possible keepalive actions in case
maximum number of failed packets is exceeded. If Switch SIM option is selected router
will try to establish the connection using the other SIM card after the maximum
number of failed packets is exceeded. If Current SIM option is selected router will only
restart the PPP connection.
Enable SIM1/SIM2 data
limit
Enable traffic data limit per SIM.
Traffic limit
Defines maximum data amount transferred over SIM card. When traffic limit is reached
SIM card cannot be longer used for network connection. Traffic limit can be defined in
units of KB (from 1 to 1024), MB (from 1 to 1024) or GB (from 1 to 1024).
SIM1/SIM2 data limit
action
In case of reaching defined data traffic limit one of two possible actions will be
performed:
1) Switch SIM – switches network connection from the SIM card on which data traffic
limit has been reached to another SIM card,
2) Disconnect – disconnects network connection over the SIM card on which data
traffic limit has been reached.
Current traffic
Displays amount of traffic that has been transferred over SIM card from the moment of
enabling "SIM data limit" option.
In order to refresh the displayed value in the "Current traffic" field please click on
Refresh
.
Summary of Contents for GWR High Speed Router Series
Page 1: ...GWR High Speed Cellular Router Series User Manual version 1 1 Date June 2014...
Page 26: ...User Manual Geneko GWR High Speed Router Series 26 Figure 17 DHCP Server configuration page...
Page 61: ...User Manual Geneko GWR High Speed Router Series 61 Figure 38 Modbus gateway configuration page...
