Geneko GWR High Speed Router Series, User Manual

Page: 103 / 133

User Manual
Geneko GWR High Speed Router Series
103
Figure 96 – IPSec configuration page III for GWR-HS Router
•
Click
Start
button on
Internet Protocol Security
page to initiate IPSEC tunnel.
Click
Start
button and after that
Connect
button on
Internet Protocol Security
page to initiate IPSEC tunnel
Figure 97 – IPSec start/stop page for GWR-HS Router
•
On the device connected on GWR-HS router setup default gateway 192.168.10.1.
The Cisco Router configuration:
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password–encryption
!
hostname
Cisco–Router
!
boot–start–marker
boot–end–marker
!
username admin password 7 ****************
!
enable secret 5 *********************
!
no aaa new–model
!
no ip domain lookup
!
!––– Keyring that defines wildcard pre–shared key.
!
crypto keyring remote
pre–shared–key address
0.0.0.0 0.0.0.0
key
1234567890
!
!––– ISAKMP policy
!
crypto isakmp policy 10
encr 3des
authentication pre–share
group 2
lifetime 28800
!
!––– Profile for LAN–to–LAN connection, that references
!––– the wildcard pre–shared key and a wildcard identity
!
crypto isakmp profile L2L
description LAN to LAN vpn connection
keyring
remote
match identity address 0.0.0.0
!