User Manual
Geneko GWR High Speed Router Series
119
Implemented rules are following:
1.
Traffic destined to WAN IP by port 5022 is forwarded to workstation 192.168.1.2 and port 22.
Result – SSH is accessible from the outside to the first workstation
2.
Traffic destined to WAN IP by port 8080 is forwarded to workstation 192.168.1.3 and port 80.
Result – WEB is accessible from the outside to the second workstation. This rule is limited only
to traffic coming from the 172.16.234.0/24 subnet
3.
Traffic destined to WAN IP from port range 300:400 is forwarded to workstation 192.168.1.4 to
port 12345
4.
WEB traffic from the workstation 192.168.1.5 is forwarded to one outside IP address
(212.62.49.109 for example)
If Source IP and Source Netmask fields are empty stated entry is applied to all incoming packets. When
PPP0 interface is selected Destination IP and Netmask are predefined to WAN IP and subnet 32 and cannot be
changed.
On the following picture are marked traffic flows stated above.
Figure 122
– Portforwarding example
Portforwarding is configured on the ROUTING page selected from the main menu. Configuration of the
examples described above is presented in the following picture:
Figure 123– GWR-HS portforwarding configuration
Summary of Contents for GWR High Speed Router Series
Page 1: ...GWR High Speed Cellular Router Series User Manual version 1 1 Date June 2014...
Page 26: ...User Manual Geneko GWR High Speed Router Series 26 Figure 17 DHCP Server configuration page...
Page 61: ...User Manual Geneko GWR High Speed Router Series 61 Figure 38 Modbus gateway configuration page...
