User Manual
Geneko GWR High Speed Router Series
66
Maintenance – Date/Time Settings
To set the local time, select
Date/Time Settings
using the Network Time Protocol (NTP) automatically or
Set the local time manually. Date and time setting on the GWR-HS Router are done through window Date/Time
Settings.
Figure 43 – Date/Time Settings configuration page
Date/Time Settings
Label
Description
Manually
Sets date and time manually as you specify it.
From time server
Sets the local time using the Network Time Protocol (NTP) automatically.
Time/Date
This field species Date and Time information. You can change date and time by
changing parameters.
Sync Clock With Client
Date and time setting on the basis of PC calendar.
Time Protocol
Choose the time protocol.
Time Server Address
Time server IP address.
Automatically
synchronize NTP
Setup automatic synchronization with time server.
Update time every
Time interval for automatic synchronization.
Time Zone
Enables daylight saving time and GMT offset based on TZ database
Save
Click
Save
button to save your changes back to the GWR-HS Router.
Reload
Click
Reload
to discard any changes and reload previous settings.
Table 24 – Date/time parameters
Summary of Contents for GWR High Speed Router Series
Page 1: ...GWR High Speed Cellular Router Series User Manual version 1 1 Date June 2014...
Page 26: ...User Manual Geneko GWR High Speed Router Series 26 Figure 17 DHCP Server configuration page...
Page 61: ...User Manual Geneko GWR High Speed Router Series 61 Figure 38 Modbus gateway configuration page...
