User Manual
Geneko GWR High Speed Router Series
27
Settings – WAN Setting
Click
WAN Settings
Tab, to open the Wireless screen. Use this screen to configure the GWR-HS Router
GPRS/EDGE/HSPA/HSPA+/LTE parameters
(Figure 18).
Figure 18 – WAN Settings configuration page
WAN Settings
Label
Description
Provider
This field specifies name of mobile operator. You can setup any name for provider.
Authentication
This field specifies password authentication protocol. Select the appropriate protocol
from drop down list. (PAP, CHAP, PAP – CHAP).
Username
This field specifies Username for client authentication at GSM/UMTS network. Mobile
provider will assign you specific username for each SIM card.
Password
This field specifies Password for client authentication at GSM/UMTS network. Mobile
provider will assign you specific password for each SIM card.
APN
This field specifies APN.
Connection Type
Specifies the type of connection router will try to establish. There are eight available
options:: Automatic (LTE preferred), UMTS 3G only, GSM 2G only, UMTS 3G preferred,
GSM 2G preferred, GSM and UMTS only, LTE only and finally LTE,UMTS,GSM.
Dial String
This field specifies Dial String for GSM/UMTS/LTE modem connection initialization. In
most cases you have to change only APN field based on parameters obtained from
Summary of Contents for GWR High Speed Router Series
Page 1: ...GWR High Speed Cellular Router Series User Manual version 1 1 Date June 2014...
Page 26: ...User Manual Geneko GWR High Speed Router Series 26 Figure 17 DHCP Server configuration page...
Page 61: ...User Manual Geneko GWR High Speed Router Series 61 Figure 38 Modbus gateway configuration page...
