Setting PLU Learning Start Number
The first PLU number for the unprogrammed barcode registration at R mode can be set.
To set the starting number, move the cursor to BCD LEARNING STR#, enter the desired
number and press
ENTER
.
5.6 Setting TIMER AND ALARM
Setting Drawer Open Time (Second)
It is possible to program seconds until an alarm is given when the drawer is kept open
after the transaction. (Unit: second, max. 6 digits)
To set the time, enter the seconds you wish and
ENTER
.
Setting Money Lift Alarm
When the ‘CASH IN DRAWER’ amount exceeds the pre-set amount, ‘MONEY LIFT
ERROR’ is displayed in the screen for an alarm at start of registration.
To set the amount, move the cursor to MONEY LIFT ALARM, enter the amount you wish
and press
ENTER
.
Setting Auto Hold Time (Second)
When the pre-set seconds pass without any operation in sales registration, the registration
is automatically held (put to HOLD area). This function is effective for Clerk 1 to Clerk 5.
To set the seconds, move the cursor to AUTO HOLD TIME, enter the seconds you wish
and press
ENTER
.
To return to PROGRAM 2 MENU, just press
ESC
.
5.7 COM1/2 SETUP
Peripherals such as barcode scanner and PC can connect to the cash register through the
ports, COM 1 and COM 2. For each port, select one option.
Setting COM 1/COM 2
1 Scanner
2 PC
0 7
bit
1 8
bit
Stop bit:
0
1 bit
1 2
bit
According to the spec of periph-
eral, enter the character length
To set COM 1, select one of the
followings, enter its number
and press
ENTER
.
5. P2 programming
44
1
2
3
4
5
6
7
8
9
10
11
12
