3.3 Explanation on character input
3.3.1. Programming names and messages
Control lock key position : P1 or P2
1. Programming department names
2. Programming PLU names
3. Programming clerk names
4. Changing transaction words
5. Programming logo messages
6. Programming commercial messages
3.3.2. How to input letters
1) For raised keyboard type ECR users
To input alphabetical letters, department keys are used. For example, to input the letter
of “A,” just press
[1 ABC]
key once. If “K” is to be input, press
[4 JKL]
key twice.
If you wish to input “ABC,” press
[1 ABC]
key once and
key,
[1 ABC]
key twice and
key,
[1 ABC]
key three times. To fix your entry, press
ENTER
.
The following symbols can be input with
[10 SYMBL]
key: ! - * # & , ( ) $
+ / @
Whenever
[10 SYMBL]
key is pressed, above symbols are displayed one by one.
When you find the symbol you need, press
key to input next letter.
2) For flat keyboard type ECR users
To input alphabetical letters and 13 symbols such as ! - * # & , ( ) $ € + / @ can be input
directly from the keyboard.
To enter space, press
[9 YZSP]
(raised K/B) or
[27 SP]
key (Flat K/B).
To correct wrong spelling, press
OVER WRITE
key, and move highlighted space by
key, and then after the right letter is input, press
OVER WRITE
key again.
To input characters with ASCII code, please refer to 3.2 Character Table.
3. Programming Layout
15
1
2
3
4
5
6
7
8
9
10
11
12
