Geller TL-550 Operating Manual Download

Page: 44 / 88

Flag 19

Enter 0 or 1 for each bit (N1 to N8), and press

ENTER

each time to fix your decision.

Bit#:

Options:

Function:

Print the clerk's starting/finising time.

Do not print the clerk's starting/finising time.

Time display in AM/PM style.

Time display in military style.

Stamp message is available.

Bit image logo is available.

A bar code reader cannot be used for PLU.

A bar code reader can be used for PLU.

Print the commercial message on the header of receipt.

Print the commercial message on the trailor of receipt.

Do not print the birth date below the sold item.

Print the birth date below the sold item.

'FULL AGE' or 'non AGE' is displayed when the [AGE] key is operated.

The actual age is desplayed.

At the beginning of transaction, the [AGE] key operation is not required.

At the beginning of transaction, the [AGE] key operation is required.

To move to next Flag, just press

PAGE UP

. If you wish to skip to Flag 23 directly, enter 23

and

DSGN

To return to PROGRAM 2 MENU, just press

ESC

Flag 20

Enter 0 or 1 for each bit (N1 to N8), and press

ENTER

each time to fix your decision.

Bit#:

Options:

Function:

Always enter "0."

Remain the journal data in the memory of electronic journal even if the total
amount is minus.

Do not remain the journal data in the memory of electronic journal if the total
amount is minus

Remain the journal data of training in the memory of electronic journal.

Do not remain the journal data of training in the memory of electronic journal.

Clear the electronic journal data after issuing the daily Z report.

Do not clear the electronic journal data even after issuing the daily Z report.

Print the electronic journal data together with issuing the daily Z report.

Do not print the electronic journal data together with issuing the daily Z report.

Memorize the journal data as electronic journal.

Do not memorize the journal data.

Keep detailed data in memory.

Keep total amounts only in memory.

Always enter "0."

To move to next Flag, just press

PAGE UP

. If you wish to skip to Flag 23 directly, enter 23

and

DSGN

To return to PROGRAM 2 MENU, just press

ESC

If Flag 20, N5 is set to 1, the full report issuance is separated from the electronic journal report issuance.

In this case, the user must take the electronic journal report by selecting 6 JOURNAL at Z MODE DAILY

screen. The flag option N5 = 1 is adopted when the customer wants to take the electronic journal data

not so often as taking the full report. For example, taking the journal data not every day but every other

day or every three days, etc. By the option of Flag 20, N6, it can be selected to store the journal data in

memory or not.

NOTE

5. P2 programming

Summary of Contents for TL-550

























































































Search results

Summary of Contents for TL-550

Reviews:

Related manuals for TL-550

Brands by name

Popular brands

Geller TL-550, Operating Manual

Search results

Summary of Contents for TL-550

Reviews:

Related manuals for TL-550

Brands by name

Popular brands