Geller TL-550 Page 40 Operating Manual Download

Page: 40 / 88

Flag 11

Enter 0 or 1 for each bit (N1 to N8), and press

ENTER

each time to fix your decision.

Bit#:

Options:

Function:

Print the grand total as a net sales amount on the Z report: the report which is issued after
resetting the sales.

Print the grand total as a gross sales amount on the Z report: the report which is issued after
resetting the sales.

Print the number of transactions on the hourly report.

Print the number of items on the hourly report.

Enable pressing just the

#/ST

Key.

Disable pressing just the

#/ST

Key.

Enable pressing the

#/ST

Key immediately after entering numeric Keys even not in ringing up.

Disable pressing the

#/ST

Key immediately after entering numeric Keys except in ringing up.

Enable [-], [-%] key operation in register mode.

Disable [-], [-%] key operation in register mode.

Enable

RA/PO

operation in register mode.

Disable

RA/PO

operation in register mode.

2nd Receipt issue by

TOTL

key depends on N8.

2nd Receipt issue by

TOTL

key is prohibited regardless of the Receipt On/Off mode.

2nd Receipt issue by

TOTL

key is enabled when the register is in Receipt Off mode.

2nd Receipt issue by

TOTL

key is enabled regardless of the Receipt On/Off mode.

To move to next Flag, just press

PAGE UP

. If you wish to skip to Flag 23 directly, enter 23

and

DSGN

To return to PROGRAM 2 MENU, just press

ESC

Flag 12

Enter 0 or 1 for each bit (N1 to N8), and press

ENTER

each time to fix your decision.

Bit#:

Options:

Function:

Print item by item in registration when Receipt On is set by the ID key.

Print after a finalization key (CASH/TEND, CHKS or CHRG key) is pressed in registration
when Receipt On is set by the ID key.

Disable the registration by another clerk’s operation while the primary clerk’s registration is
interrupted.

Enable the registration by another clerk’s operation while the primary clerk’s registration is
interrupted and kept in memory as HOLD.

Print the consecutive number on reports.

Do not print the consecutive number on reports.

Print hourly total in the X/Z reports by pressing the X key.

Print daily total in the X/Z reports by pressing the X key.

Do not reset the transaction number (consecutive number) after issuing the Z report.

Reset the transaction number (consecutive number) after issuing the Z report.

Change the “Department 11 to 20 entry mode” back to the “Department 1 to 10 entry mode”
when the current sales transaction is finished.

Stay in the “Department 11 to 20 entry mode” until the

DEPT/SHFT

Keys pressed again to

change back to the “Department 1 to 10 entry mode”.

Do not reset the clerk password each time the position of the Control Lock is changed.

Reset the clerk password each time the position of the Control Lock is changed.

Do not reset the clerk password after each sales transaction is finished.

Reset the clerk password after each sales transaction is finished.

To move to next Flag, just press

PAGE UP

. If you wish to skip to Flag 23 directly, enter 23

and

DSGN

To return to PROGRAM 2 MENU, just press

ESC

5. P2 programming

Summary of Contents for TL-550

























































































Search results

Summary of Contents for TL-550

Reviews:

Related manuals for TL-550

Brands by name

Popular brands

Geller TL-550, Operating Manual

Search results

Summary of Contents for TL-550

Reviews:

Related manuals for TL-550

Brands by name

Popular brands