Setting LINK #
Inputting the linked department number is required.
Setting AGE TABLE
Select the age table number or 0 (= nothing is selected). Refer to 4.10 Setting AGE TABLE.
If the displayed number is correct, press
ENTER
.
To move to next PLU, just press
PAGE UP
. If you wish to skip to PLU 10 directly, enter 10
and
DSGN
.
To return to PROGRAM 1 MENU, just press
ESC
.
: When the barcode is set as "0", all the programmed data on such PLU are cleared.
4.4 Setting TAX
You can program up to four types of tax to be added to each item. We call these four taxes
TAX1, TAX2, TAX3 and TAX4. To program a tax, you must select a taxation system and
enter the tax rate for that tax. For the instructions how to add these programmed taxes to
an item, see “Setting Function Flags” in section 4.2, “Department Programming”.
At PROGRAM 1 MENU, enter 4 and
ENTER
to move to TAX NO.1 program screen.
Selecting a Taxation System
Setting Tax Rate
Up to 99.9999% can be entered for the tax rate. If the rate is 7.5%, enter 75000 and
ENTER
.
Setting Type
After selecting in the following, enter 0, 1 or 2 for Tax type and
ENTER
.
Bit#
Options:
Function:
0
Select Add-on tax
1
Select VAT
2
Select Tax table
Add-on tax
This system calculates tax by using a tax rate you enter and it automatically adds the tax
to the unit price or the price entered.
VAT
The Value Added Tax is a European tax system. It calculates tax by using the tax rate
you enter and includes the calculated tax in the unit price or the price entered from the
keyboard.
NOTE
4. P1 programming
20
1
2
3
4
5
6
7
8
9
10
11
12
