Instruction Manual
SBI-COP/DN-AGy Card •
Eng
lish
Chapter 7 - Keyboard Interface
7.1 Main Menu Structure
DISPLAY
d000
- - - - - - - - - - - - - -
Output frequency
0.0 Hz
STARTUP
S000
- - - - - - - - - - - - - -
INTERFACE
I000
- - - - - - - - - - - - - -
FREQ & RAMP F000
- - - - - - - - - - - - - -
PARAMETER P000
- - - - - - - - - - - - - -
APPLICATION A000
- - - - - - - - - - - - - -
COMMAND
C000
- - - - - - - - - - - - - -
Prg
Prg
Prg
Prg
Prg
Prg
Prg
Menu of read-only parameters (display)
Menu of basic drive start up parameters
Menu of input/output drive settings (digital/analog)
Menu of multi frequencies and ramps settings
Menu of read/write drive parameters
Menu of PID function settings
Menu of control-type parameters (Save, Load default, etc.)
Prg
At the
drive
power up the keypad display will show “
Output frequency
(d.000)
” parameter of DISPLAY menu.
After starting the drive, press the
Prg
key three times to select the
INTER-
FACE
menu.
Press the
or
keys to select the
I.750 SBI address
parameter.
Press
Enter
and press again the
or
keys to set the parameter = [4],
press
Enter
again to confirm.
Press the
key to select the
I.751 CAN baudrate
parameter.
Press
Enter
to enter the parameter setting mode.
Press
Enter
to confirm the new setting.
Press the
key to select the
I.753 SBI CAN mode
parameter and select
the desired protocol.
Press the
key to select the
I.760 ... I.775
parameters.
