• SBI-COP/DN-AGy Card
Instruction Manual
Eng
lish
Writing (P.001, byte 3 and 4) F.100 = 500, the drive sets the reference to
5.00 Hz
Writing (P.001, byte 1 and 2) H.000 = 1, the motor Runs in forward direction
at 5.00 Hz
Writing (P.001, byte 1 and 2) H.000 = 3, the motor Runs in reverse direction
at 5.00 Hz
Writing (P.001, byte 1 and 2) H.000 = 0, the motor Stops
Reading (P.001, byte 1 and 2) H.034, the drive status is returned.
bit 0 = (1) Drive ready -- (0) Drive not ready
bit 1 = (1) Alarm active -- (0) Alarm not active
bit 2 = (1) Motor running -- (0) Motor not running
bit 3 = (1) Steady state -- (0) Not Steady state
Reading (P.001, byte 3 and 4) d.000, the actual output frequency is re-
turned.
500 if the motor Runs in forward direction
-500 if the motor Runs in reverse direction
0 if the motor Stops
Activating the digital input 5 the drive goes in alarm condition.
