GE Solar 8000M/i, Service Manual

Page: 128 / 192

6-4 Solar 8000M/i patient monitor 2026265-075C
Configuration: Configuring a patient monitor
Patient monitor type
The PATIENT-MONITOR TYPE selection determines the type of
monitor desired, i.e., adult, neonatal or operating room. Different alarms
and parameters are activated for each selection. This menu item is part
of the
SERVICE MODE menu.
CAUTION
Each time the patient-monitor type is changed, the
ADMIT MENU function defaults to STANDARD
configuration. Be aware that some alarms and
parameters may be changed.
NOTE
The keypad or remote control is DIDCA programmed for specific
monitor types. The error message
WARNING: REMOTE
MISMATCHED WITH MONITORING MODE displays if the
monitor and keypad/remote control do not match.
Access PATIENT-MONITOR TYPE option, starting from the MAIN
menu.
1. Select MORE MENUS > MONITOR SETUP > SERVICE MODE .
2. Enter password using the TRIM KNOB control to select the day and
month from monitor screen with leading zeros (e.g., July 4 = 0407).
3. Select PATIENT-MONITOR TYPE . Be sure to read the information
in the ATTENTION box before changing anything.
4. Rotate TRIM KNOB control to select the type of environment the
monitor will be used in.
5. Press TRIM KNOB control to exit. Your selection displays at the top
of the screen after the time.
↓ ↑
053A