GE Senographe 2000 D Operator'S Manual Download Page 124

Page: 124 / 174

GE Healthcare

Senographe 2000 D Acquisition System

REV 1

OM 5179217–1–100

122

Auto-contrast. This improves image quality by optimizing the levels of brightness (window level)
and contrast (window width) in the image.

As soon as the selected algorithm has been applied, the processed image replaces the raw image
on the screen. The operator can select which of four levels of contrast should be applied (

High,

Low

Standard

, or User defined, selected in the Viewer Control Panel window).

For Premium View, there is no predefined user value, but User level can be set if the user saves
the image with modified levels.

FOR

TRAINING

PURPOSES

ONLY!

NOTE:

Once

downloaded,

this

document

UNCONTROLLED,

and

therefore

may

not

the

latest

revision.

Always

confirm

revision

status

against

validated

source

(ie

CDL).

Summary of Contents for Senographe 2000 D












































































































































































Search results

Summary of Contents for Senographe 2000 D

Reviews:

Related manuals for Senographe 2000 D

Brands by name

Popular brands

GE Senographe 2000 D, Operator'S Manual

Search results

Summary of Contents for Senographe 2000 D

Reviews:

Related manuals for Senographe 2000 D

Brands by name

Popular brands