GE Druck DPI 610, User Manual

Page: 34 / 90

K415 Issue No. 1 24
Flow Function
To apply the flow function to a selected input, enable FLOW from the process
menu and press ENTER . The square root symbol is displayed beside the input
value to indicate that the FLOW function is active:
To cancel FLOW, press INPUT and turn function
OFF at the process menu.
%Span
To convert a selected input display from a numerical value to a percentage of
full-scale reading, enable
SPAN from the process menu and press F1 (SETTINGS)
to provide access to the span definition parameters. Two span definitions are
required,
Zero and Full Scale .
To leave span at current setting, press EXIT .
To define zero and full-scale settings, proceed as follows:
To cancel %SPAN , press INPUT and turn function OFF at the process menu.
bar
V
FCT. : CONFIG. 24V OFF
MODE ENREG. RAPIDE
SELECTIONNER
VALEUR
SELECTIONNER
VALEUR DEFINE ECH.
VALEUR AFFICHEE
V
50.000 V
0% =
100% =
ENTER UNE VALEUR OU F2
POUR SELECTIONNERVALEUR
ACTUELLE OU EXIT POUR
QUITTER SANS MODIFICATIONS
DEFINE ECH.
VALEUR AFFICHEE
V
V
0.000 0% =
100% =
_
_
ENTER UNE VALEUR OU F2
POUR SELECTIONNERVALEUR
ACTUELLE OU EXIT POUR
QUITTER SANS MODIFICATIONS
CHANGER
VALEUR
CHANGER
VALEUR
LECTURE
ACTUELLE
LECTURE
ACTUELLE
Advanced Task Process Functions