GE Druck DPI 610, User Manual

Page: 14 / 90

K415 Issue No. 1 4
HARD KEY FUNCTIONS (Figure 1)
* These key functions are not available in BASIC mode
Key Function
Page
reference
I/O
This key is used to turn the instrument ON and OFF. 7
SETUP*
The SETUP key provides access to the instrument’s general
configuration parameters that are set up to certain default
parameters on delivery.
37
ZERO
The ZERO key can be used to zero either the selected input or output
display, if the display reading is within 5% of zero. Attempts to zero a
larger offset result in an error message,
Zero too large.
9
INPUT*
The INPUT key is used to select the input parameter to be displayed. 20, 21
TASK
The TASK key is used as a means of rapidly configuring the instrument
for a number of different types of external device calibration. There
are twenty task configurations available, eleven of which are pre-
programmed and nine are user definable
10
OUTPUT*
The OUTPUT key is used to select output parameter to be displayed. 25-28
STORE*
Depending upon how the instrument’s STORE mode is setup, this key
is used either to store up to 20 display screens (in SNAPSHOT mode), or
to manually log a screen in DATALOG mode.
30-36
RECALL*
This key is used to recall a previously stored screen to the display.
Depending on the
STORE mode set-up, operation of this key recalls
either the snapshot of a previously stored screen or datalog file. In
STORE mode, selection displays the last screen stored. By using the
cursor keys, the operator can scroll either forward or back through
memory locations.
30, 32-36
ENTER
The ENTER key is used either to enter data (accept entered data), or, in
conjunction with the soft keys, to accept a given selection.
2
EXIT
The EXIT key operates in conjunction with all the other hard and soft
keys to exit from the current screen or menu level, to the level
immediately preceding it. To quit completely from any menu level,
press
EXIT until the MEASURE/SOURCE screen is displayed.
2
INTRODUCTION Summary of Functions