GE AF-650 GP Series, Programming Manual

Page: 124 / 175

LC-10 Comparator Operand
Array [6]
Option: Function:
[131] Digital input DI19 Digital input 19. High = True.
[132] Digital input DI27 Digital input 27. High = True.
[133] Digital input DI29 Digital input 29. High = True.
[134] Digital input DI32 Digital input 32. High = True.
[135] Digital input DI33 Digital input 33. High = True.
[150] Logic Controller
digital output A
Use the result of the Logic Controller
output A.
[151] Logic Controller
digital output B
Use the result of the LC output B.
[152] Logic Controller
digital output C
Use the result of the LC output C.
[153] Logic Controller
digital output D
Use the result of the LC output D.
[154] Logic Controller
digital output E
Use the result of the LC output E.
[155] Logic Controller
digital output F
Use the result of the LC output F.
[160] Relay 1 Relay 1 is active
[161] Relay 2 Relay 2 is active
[180] Local referecnce
active
High when F-02 Operation Method =
[2] Local or when F-02 Operation
Method is [0] Linked to hand Auto , at
the same time as the keypad is in
Hand mode.
[181] Remote reference
active
High when F-02 Operation Method = [1]
Remote or [0] Linked to hand/auto ,
while the keypad is in Auto mode.
[182] Start command High when there is an active start
command, and no stop command.
[183] Drive stopped A stop command (Jog, Stop, Qstop,
Coast) is issued – and not from the
Logic Controller itself.
[185] Drive in hand
mode
High when the frequency converter is
in hand mode.
[186] Drive in auto
mode
High when the frequency converter is
in auto mode.
[187] Start command
given
[190] Digital input x30 2
[191] Digital input x30 3
[192] Digital input x30 4
LC-11 Comparator Operator
Array [6]
Option: Function:
[0] < Select [0] < for the result of the evaluation to
be TRUE, when the variable selected in
LC-10 Comparator Operand is smaller than
the fixed value in LC-12 Comparator Value .
The result will be FALSE, if the variable
selected in LC-10 Comparator Operand is
greater than the fixed value in
LC-12 Comparator Value .
[1]
*
≈ (equal) Select [1] ≈ for the result of the evaluation to
be TRUE, when the variable selected in
LC-10 Comparator Operand is approximately
equal to the fixed value in LC-12 Comparator
Value .
[2] > Select [2] > for the inverse logic of option [0]
< .
[5] TRUE longer
than..
[6] FALSE longer
than..
[7] TRUE shorter
than..
[8] FALSE
shorter
than..
LC-12 Comparator Value
Array [6]
Range: Function:
0
*
[-100000 -
100000]
Enter the ‘trigger level’ for the variable
that is monitored by this comtor. This is
an array parameter containing comtor
values 0 to 5.
LC-15 RS-FF Operand S
Option: Function:
[0]
*
False
[1] True
[2] Running
[3] In range
[4] On reference
[5] Torque limit
[6] Current Limit
[7] Out of current range
[8] Below I low
[9] Above I high
[10] Out of speed range
[11] Below speed low
[12] Above speed high
[13] Out of feedb. range
[14] Below feedb. low
[15] Above feedb. high
Parameter Descriptions AF-650 GP Programming Guide
DET-618C 123
3 3