GE AF-650 GP Series, Programming Manual

Page: 122 / 175

LC-02 Stop Event
Select the boolean (TRUE or FALSE) input to deactivate Logic
Controller.
Option: Function:
[74] Logic Controller Time-out 7 Logic Controller timer 7 is
timed out.
[75] Start command given
[76] Digital input x30 2
[77] Digital input x30 3
[78] Digital input x30 4
[94] RS Flipflop 0 See parameter group LC-1#
Comparators
[95] RS Flipflop 1 See parameter group LC-1#
Comparators
[96] RS Flipflop 2 See parameter group LC-1#
Comparators
[97] RS Flipflop 3 See parameter group LC-1#
Comparators
[98] RS Flipflop 4 See parameter group LC-1#
Comparators
[99] RS Flipflop 5 See parameter group LC-1#
Comparators
[100] RS Flipflop 6 See parameter group LC-1#
Comparators
[101] RS Flipflop 7 See parameter group LC-1#
Comparators
LC-03 Reset Logic Controller
Option: Function:
[0]
*
Do not reset Logic
Controller
Retains programmed settings in all
parameter group LC-## Logic
Controller .
[1] Reset Logic
Controller
Resets all parameters in parameter
group LC-## Logic Controller to default
settings.
3.19.2 LC-1# Comparators
Parameters to configure the Logic Controller (LC)
comparators. Comparators are used for comparing
variables with fixed preset values.
LC-10 Comparator Operand
Array [6]
Option: Function:
Choices [1] to [31] are variables which
will be compared based on their
values. Choices [50] to [186] are digital
values (TRUE/FALSE) where the
comparison is based on the amount
of time during which they are set to
LC-10 Comparator Operand
Array [6]
Option: Function:
TRUE or FALSE, respectively. See
LC-11 Comparator Operator .
Select the variable to be monitored by
the comparator.
[0]
*
DISABLED The comparator is disabled.
[1] Reference The resulting remote reference (not
local) as a percentage.
[2] Feedback In the unit [RPM] or [Hz]
[3] Motor speed [RPM] or [Hz]
[4] Motor Current [A]
[5] Motor torque [Nm]
[6] Motor power [kW] or [hp]
[7] Motor Rated
Voltage
[V]
[8] DC-link voltage [V]
[9] Motor Thermal Expressed as a percentage.
[10] Drive thermal Expressed as a percentage.
[11] Heat sink temp. Expressed as a percentage.
[12] Analog input AI53 Expressed as a percentage.
[13] Analog input AI54 Expressed as a percentage.
[14] Analog input
AIFB10
[V]. AIFB10 is internal 10 V supply.
[15] Analog input
AIS24V
[V] Analog input AICCT [17] [°]. AIS24V
is switch mode power supply: SMPS
24V.
[17] Analog input
AICCT
[°]. AICCT is control card temperature.
[18] Pulse input FI29 Expressed as a percentage.
[19] Pulse input FI33 Expressed as a percentage.
[20] Alarm number The error number.
[21] Warning number
[22] Analog input x30
11
[23] Analog input x30
12
[30] Counter A Number of counts
[31] Counter B Number of counts
[50] FALSE Enters the fixed value of false in the
comparator.
[51] TRUE Enters the fixed value of true in the
comparator.
[52] Control ready The control board receives supply
voltage
Parameter Descriptions AF-650 GP Programming Guide
DET-618C 121
3 3