GCE MEDIEVAC+, Instructions For Use Manual

Page: 9 / 140

9/139
EN
6.4. AFTER USE
• Before disconnecting regulator from the medical pipe line system
terminal unit:
− Turn it Off , by pushing the green button and set vacuum level control
knob at minimum vacuum position by turning it clockwise.
− Remove suction tubing connection from patient side.
− Visually check if the safety container and the fi lter are contaminated;
if so disconnect it and clean/replace according to section 8.
Refer to appendix Nr 2 to get information about connecting / disconnecting
procedure (For regulator fi tted with a rail clip and a fl exible hose, disconnect
the quick coupler prior to un-clip the vacuum regulator on the rail).
7. ACCESSORIES
Not available.
For closer information about the possible optional equipment refer to the
section 8.2 associated equipment.
8. CLEANING
8.1. VACUUM REGULATOR
If there is risk that M is exposed to contamination following
cleaning shall be used:
Remove general contamination with a soft cloth damped in oil free oxygen
compatible soap water and clean with deionised water.
Disinfection can be done with an alcohol-based preparation (moistened
wipe). If another cleaning agent is used, check that it is not abrasive and is
compatible with the product materials (including labels) and gas (a suitable
cleaning agent - e.g. Meliseptol).
Do not immerse the product in any liquid.
Do not expose to high temperature (such as autoclave).
Do not use cleaning solutions contains ammonia.
8.2. ASSOCIATED EQUIPMENTS
The used associated equipment shall comply with EN ISO 10079-3
as amended and with appropriate Instruction for use:
• Filter: Use a fi lter with the required connection.
• Suction hose: Use suction hoses with an inner diameter of 6mm.
• Collection container: Use the collection container with the required
connection.
• Safety container: Use safety containers with the required connection.
Before connecting any associated equipment or medical device to the
Me, always check that they are fully compatible with connection
features & performances of the product.